Flashlink HDSDI-CHO-2×1-PB is a two input HD/SD automatic change-over with passive bypass of both inputs. It also comes as a option without passive bypass.
Benefits
- Cost efficient protection solution
- Always signal thru-put
Applications
- Head-end signal protection
- Broadcast signal protection
- Studio interconnection
- Broadcast contribiution
Key Features
- Full protection of both inputs at mains or card failure
- Multirate changeover
- Non broadcast data rates also supported
- Automatic change-over desision on loss of signal or loss of reclocker lock
- Configurable change back logic
- Reports signal loss and bit rates
- GPI control and alarms
- Integrated DA with 4 reclocked HD/SD-SDI outputs
DISCOUNTINUED
| Item No. | Item Name | Description |
| 11169 | HDSDI-CHO-2X1 | HD/SD-SDI 2×1 Changeover with reclocker. Auto change on loss of input or reclocker out of lock. Reports loss of input and signal bit rate. GPI control and alarms. DA with 4 HD/SD-SDI outputs. |
| 19221 | HDSDI-CHO-2×1-PB | 2×1 Changeover for HD/SD-SDI with reclocker. Auto change on loss of input or reclocker out of lock. Reports loss of input and signal bit rate. GPI control and alarms. DA with 4 HD/SD-SDI outputs. With passive bypass of inputs to outputs at failure. |
| 11388 | SDI-CHO-2×1 | 2×1 Changeover for SD-SDI with reclocker. Auto change on loss of input or reclocker out of lock. Reports loss of input and signal bit rate. GPI control and alarms. DA with 4 SD-SDI outputs. Gyda enabled and SNMP support. |
| 19220 | SDI-CHO-2×1-PB | 2×1 Changeover for SD-SDI with reclocker. Auto change on loss of input or reclocker out of lock. Reports loss of input and signal bit rate. GPI control and alarms. DA with 4 SD-SDI outputs. With passive bypass of inputs to outputs at failure. |