The flashlink ® ADC-SDI-CC is a high quality digital video decoder that digitises and decodes all popular baseband video formats into SDI 4:2:2 digital component video. The ADC-SDI-CC supports the analogue-to-digital conversion of component RGB and YPbPr signals, as well as the decoding of NTSC and PAL composite and S-video into component digital video. This decoder features four 10-bit A/D converters running with 2 x oversampling (27MHz), which are then digitally filtered and decimated to the 1 x pixel rate giving a higher signal-to-noise ratio for each input channel.</>
When used with the GYDA control system, gain adjustments may be made to each analogue input.
Composite video decoding utilises a 5-line adaptive comb filter for both the luma and chroma signal paths to reduce cross-luma and cross-chroma artefacts. A alternative chroma trap filter is also available. On composite and S-video inputs, the user can control video characteristics such as contrast, brightness, saturation and hue via the GYDA control interface. The GYDA system controller is used with all flashlink and flashlink modules providing a common control and monitoring platform.
The flashlink ADC-SDI-CC is a high quality digital video decoder that digitises and decodes all popular baseband video formats into SDI 4:2:2 digital component video. The ADC-SDI-CC supports the analog-to-digital conversion of component RGB and YPbPr signals, as well as the decoding of NTSC and PAL composite and S-video into component digital video.
This decoder features four 10-bit A/D converters running with 2 x oversampling (27MHz), which are then digitally filtered and decimated to the 1 x pixel rate giving a higher signal-to-noise ratio for each input channel.
When used with the GYDA control system, gain adjustments may be made to each analogue input. Composite video decoding utilizes a 5-line adaptive comb filter for both the luma and chroma signal paths to reduce cross-luma and cross-chroma artefacts. An alternative chroma trap filter is also available. On composite and S-video inputs, the user can control video characteristics such as contrast, brightness, saturation and hue via the GYDA control interface. The GYDA system controller is used with all flashlink and flashlink modules providing a common control and monitoring platform.
